Trim, baseboard and finish carpentry in Chico, CA
New baseboard, door and window casing, interior doors, crown molding and simple built-ins. Finish carpentry with tight joints and clean caulk lines, so the room looks done.
The details that make a room look finished
Trim is a small part of the budget and a big part of how a room looks. Gapped miters, baseboard that doesn't sit down to the floor, or a thin builder-grade casing next to a new floor make an otherwise nice room look unfinished. CCB Construction is a residential construction and remodeling contractor based in Chico, and finish carpentry is work our own crew does, either as its own project or as the last step of a remodel. Tyler Carlisle runs every job himself, and because he also buys, renovates and resells houses in the area, he knows how much a trim upgrade changes how a house shows.
What we install
- Baseboard, in profiles from simple square-edge to taller craftsman and colonial styles, with shoe or quarter round where the floor needs it.
- Door and window casing, including replacing thin original casing with a wider, more substantial profile.
- Interior doors, including pre-hung replacements, slab doors fit to existing jambs, and new hardware.
- Crown molding in living rooms, dining rooms and primary bedrooms.
- Window stools and aprons, wainscoting, board-and-batten and accent walls.
- Simple built-ins such as window seats, shelving and closet systems.
- Exterior trim: fascia, window and door trim and corner boards, often as part of siding or stucco repair.
Common trim projects in Chico homes
New floors are the most common reason people replace trim. Old baseboard rarely comes off without damage, the new floor is often a different height, and it is the right moment to upgrade the profile. Many Chico houses from the 1960s through the 1990s were built with thin, simple trim and hollow-core doors, and upgrading to taller baseboard, wider casing and solid-core doors is one of the most cost-effective ways to make an older house feel newer. Older homes near downtown sometimes still have original wood trim worth keeping, and in those houses we match profiles and repair rather than replace.
What drives the cost of trim work
We give a fixed price in writing after a walkthrough. The main factors are:
- Linear footage and the number of corners. A house with lots of small rooms, closets and hallway openings has more cuts per foot of trim.
- Profile and material. Primed MDF is common for painted baseboard and casing; finger-jointed pine and hardwoods cost more and are used where trim will see more wear or will be stained.
- Wall and floor conditions. Out-of-square corners, wavy walls and uneven floors take more scribing and fitting.
- Doors. Replacing doors and jambs costs more than casing alone, and older openings are often not standard sizes.
- Paint. Trim painted in place versus pre-finished, and whether walls get painted at the same time.
How a trim project runs with us
First, a walkthrough to measure the rooms, look at the existing trim and doors, and talk through profiles and style. Second, a written scope with a fixed price listing every room, the profiles and materials, and whether painting is included. Trim and doors get ordered and delivered early so they can sit in the house before installation. Third, the work: removal, installation, nail holes filled, joints caulked, then paint. Floors and furniture are protected, and the site is swept daily. Fourth, a final walkthrough room by room.
How trim fits with other work
Trim is usually the last carpentry on a project, which means it ties together flooring, paint and doors. The cleanest sequence is flooring first, then baseboard, then paint. If you are planning new floors, a kitchen or a bathroom, doing the trim in the same project costs less than doing it later, and everything matches.
Questions people ask
Should baseboard go in before or after new flooring?
After hard flooring like LVP, tile or hardwood, so the baseboard covers the expansion gap and sits right on the finished floor. With carpet, baseboard usually goes in first, set slightly above the subfloor.
Can you match my existing trim in just one room?
Usually. Common profiles are easy to find. For older or discontinued profiles we can often get close with stock pieces, and in some cases a custom match costs more. We will tell you which applies during the walkthrough.
Is MDF baseboard good enough?
For painted trim in dry rooms, primed MDF works well and stays straight. In bathrooms, laundry rooms and entries where it may get wet, we use moisture-resistant material or wood.
Do I need a permit for trim or interior doors?
Generally no. Trim and interior door replacements are finish work and don't usually require a permit. Changing a door opening in a wall can, and we will tell you if your project needs one.
Related work
Where we work
Chico and the rest of Butte, Yuba, Sutter, Shasta and Sacramento counties, including:
- Home remodeling in Oroville
- Home remodeling in Paradise
- Home remodeling in Durham
- Home remodeling in Magalia
- Home remodeling in Gridley
- Home remodeling in Yuba City
- Home remodeling in Marysville
- Home remodeling in Redding
- All areas we serve
Start a project
Tell us about the job, add a couple of photos if you have them, and we will reach out within one business day to set up a walkthrough. You get a written scope and a fixed price before anything is scheduled.